Engineering and manufacturing high quality and reliable analyser solutions. Analyser systems can improve product quality, increase the yields of products with higher economic value, increase product throughput and output and reduce energy costs.
Process analyzer systems should be considered for product quality control when frequent and rapid measurements are required because of fast and substantial variations in process stream quality.
Today, environmental standards are becoming more stringent. Process analyzers are used to detect hazardous plant conditions and for monitoring government-mandated requirements concerning pollutants in ambient air, stack emissions, and effluent streams.
Mechatest offer a full design and manufacturing capability for the supply of analyser solutions in cabinets and walk-in shelters.
Our solutions are suitable for outdoor use in an industrial environment and ATEX Zone 1 or 2.
After selecting the analysers and designing the sample systems it is very important to choose the environment for the complete system.
The assembly of multiple instruments in a shelter creates several economic advantages:
Engineering and manufacturing high quality analyser shelters. Mechatest offer a full design and manufacturing capability for the supply of analyser shelters. Our shelters are suitable for outdoor use in an industrial environment. After selecting the Analysers and designing the sample systems it is very important to choose the environment for the complete system.
The design of the analyzer cabinet or shelter must consider many factors:
Sample probes are very important and mostly an underestimated part of the sampling
Why you should use sample probes;
Sample Pre-Conditioning System (SCS) can be necessary to cool the sample, heat up, reduce or boost the pressure or to vaporise from liquid to gas.
Reasons for this can be :
The total of the necessary equipment for this is called the Pre-conditioning system.
This system is placed on or near the sample take-off point. The sample pre-conditioning system can typically comprise one of the following components:
When pressure regulators or vaporising pressure regulators are used, it is very important that the volume between the sample “sample take-off point” and the vaporiser (regulator) is kept to a minimum to avoid long sample time lag.
Sample Conditioning System (SCS) are necessary if some of the functions are not solved in the pre-conditioning;
Flexible Sample Transport Line
The Mechatest liquid sample recovery systems are specifically designed to collect liquids of sample effluent from process liquid analysers and return this to the process line or any other suitable location.
Because of the high sensitivity of the process analysers the sample discharge needs to drain under atmospheric pressure conditions. Liquid sample recovery systems provides a stable condition at the process analyzer outlet.
Typical applications are analysis of gasoline, bio
The system is also ideal for use in applications where it is undesirable to discharge hydrocarbons or chemicals into sewage drains.
Effectively dealing with the effluent from process analyzers is a concern to both environmental engineers and process analyzer engineers at petrochemical plants.
Calibration system for FT-NIR analyser
This kind of calibration system is ideal for the cleaning and calibration of the FT-NIR analyser. The calibration system is based on two storage vessels, one for cleaning with Pentane and one for calibration with Toluene. The buffers vessels with levelalarm will avoid that gas-bubbles will flow to the analyser.
Engineering and manufacturing high quality analyser shelters
Mechatest offer a full design and manufacturing capability for the supply of analyser shelters.
Our shelters are suitable for outdoor use in an industrial environment.
After selecting the Analysers and designing the sample systems it is very important to choose the environment for the complete system.
We make sampling solutions helping to protect the environment now and for future generations, together we can make a difference.
It is disgraceful but Mechatest is scammed by a Chinese company.
We have been informed from the market that copies of our sampling systems are being sold on the Chinese market under Mechatest name.
These systems are not of original Mechatest quality. Please check who are our official agencies on our contact page, read more ...